Bottle Holder Handlebars Brake Knob / Resistance Adjustment Seat Assembly Cam Clamp Handlebar Post Adjustment Lever Fender Cam Clamp Flywheel Drive Belt Seat Post (under cover) Front Stabilizer Stretch Pad Transport Wheels Pedal Crank Rear Stabilizer LeMond RevMaster ASSEMBLY AND INSTALLATION...
Page 10
ASSEMBLY INSTRUCTIONS DELIVERY [not to scale] Assembly Parts...
Page 11
ASSEMBLY INSTRUCTIONS REMOVE THE BIKE AND COMPONENTS FROM THE SHIPPING CARTON ASSEMBLY Note: It is not necessary to remove the bike from the foam shipping cradle before assembly.
ASSEMBLY INSTRUCTIONS Note: The handle on the adjustment lever has a ratchet function. Once you have tightened a lever, pull out on the handle and rotate it so it does not stick out. Release the handle to lock it into place. Pull Out and Rotate Note: There is a pressure pad at the end of the adjustment lever that is held in place by shipping foam.
OPERATING INSTRUCTIONS INSTRUCTIONS FOR FIRST-TIME USERS ADJUSTING THE FIT Seat Adjustment: Adjusting the Seat’s Height Adjusting the Seat’s Forward/Aft Position...
Page 15
OPERATING INSTRUCTIONS Note: There are two threaded holes on the seat assembly slider, to allow a greater range of forward/aft ad- justment. The seat adjustment lever can be attached to either. Taller users may want to use the front hole; shorter users may want to use the back hole. Handlebar Adjustment: Adjusting the Handlebar Height Adjusting the Handlebar’s Forward/Aft Position...
GENERAL EXERCISE GUIDELINES FLEXIBILITY TRAINING* EXERCISE PRINCIPLES * *Note: Some of the material contained in this section is adapted from The StairMaster® Fitness Handbook 2nd Ed., James A Peterson, and Cedric X. Bryant (editors), Sagamore Publish- ing, 1995.
TROUBLESHOOTING TROUBLESHOOTING SYMPTOM: Seat or handlebar post move after locked into position. SYMPTOM: Clicking noise with each pedal revolution. SYMPTOM: Clicking noise when flywheel rotates. SYMPTOM: Drive belt is slipping. Note: Use caution around belt when cover is removed. SYMPTOM: Knocking noise or play felt in pedals/cranks. Note: Left pedal is reverse threaded.
Page 21
TROUBLESHOOTING SYMPTOM: Inconsistent resistance or noisy brake pad. SYMPTOM: Rocking or movement from RevMaster while in use. Note: You will have to remove the stretch pad to check the rear stabilizer mounting bolts.