EPSON Stylus Photo 1390/1400/1410
11. Remove the three C.B.S. (P4) 3x8 screws that secure the ASF Assy, and remove
the ASF Assy from the Printer Mechanism.
ASF Assy
1
6) C.B.S. (P4) 3x8
(8±1 kgf.cm)
2
Figure 4-32. Removing the ASF Assy
DISASSEMBLY AND ASSEMBLY
6) C.B.S. (P4) 3x8
(8±1 kgf.cm)
34
Disassembly/Assembly Procedures
Align the Guide Pin and four tabs on the ASF Assy with the
positioning holes on the Main Frame so that there is no gap
between the ASF Assy and the Main Frame.
Tab
Tab
Tab
Figure 4-33. Installing the ASF Assy
Tighten the screws in the order shown in
Revision B
Guide Pin
Tab
Figure 4-32.
88