Epson Stylus Photo 1390 Service Manual page 67

EPSON Stylus Photo 1390/1400/1410
Observed Faults Details of the Fault
The printout is The non-printed side or the
stained with ink. bottom of the printout is dirty
with ink.
When the paper size in the sent
print data is larger than the size
of the fed paper, data is printed
on the Front Paper Guide,
extending off the paper.
Ink smudges appear on the blank
area of the printout.
TROUBLESHOOTING
Table 3-12. Print Quality Troubles
Faulty Part/
Part Name
Front Paper 1. Check if the Front Paper Guide Pad is installed securely and
Guide Pad evenly in the setting position.
Front Paper Guide Pad
PW sensor 1. Check that the PW Sensor FFC is connected.
2. Check that the PW Sensor is not faulty.
Paper EJ Frame 1. Check the Star Wheel Rollers for ink stain.
Assy.
Front Paper 1. Check the Front Paper Guide for ink stain.
Guide
Overview
Check Point
Front Paper Guide
Revision B
Remedy
1. If the Ink pads are not securely installed,
reinstall the Front Paper Guide Pad correctly.
1. Connect the PW Sensor FFC.
2. Replace the PW Sensor with a new one.
1. Clean the Star Wheel Rollers with a soft cloth.
1. Clean the Front Paper Guide with a soft cloth.
67