EPSON Stylus Photo 1390/1400/1410
When performing the following procedure, take care not to scratch
C A U T I O N
the Star Wheel.
5.
Pull the Star Wheel Roller toward you, and remove the Paper EJ Frame Assy from
the Printer Mechanism.
Figure 4-150. Removing the Paper EJ Frame Assy
DISASSEMBLY AND ASSEMBLY
Star Wheel Roller
Procedure Specific to Stylus Photo 1390
Hook both rear ends of the Paper EJ Frame Assy onto the tabs
of the Main Frame.
Figure 4-151. Installing the Paper EJ Frame Assy
Match the tabs with the five Positioning Holes.
See Figure 4-149.
Tighten the screws in the order shown in
After replacing or removing the Paper EJ Frame Assy, the
A D J U S T M E N T
R E Q U I R E D
following adjustment must be performed.
1. PW Sensor Adjustment
2. PF Adjustment
3. PF Adjustment (Bottom Margin)
Refer to Chapter 5 "Adjustment" for details on the adjustments.
Revision B
Tabs
Figure 4-149.
(p.133)
(p.133)
(p.133)
130