Lubrication - Epson Stylus Photo 1390 Service Manual

EPSON Stylus Photo 1390/1400/1410

6.1.4 Lubrication

The lubrication used for the components of the printer has been decided on bases of
evaluation carried out by Epson. The specified type of grease and the amount, and
places of lubrication given in this section should be strictly observed.
Never use oil or grease other than those specified in this
C A U T I O N
manual. Use of different types of oil or grease may damage the
components or affect the printer functions.
Never apply a larger amount of oil or grease than specified in
this manual.
Table 6-1. Grease Applied to the Stylus Photo 1390/1400/1410
Type Name
Grease G-26
Grease G-45
Grease G-71
MAINTENANCE
Supplier
EPSON CODE
1080614 EPSON
1033657 EPSON
1304682 EPSON
Adjust Parallel Bushing (Right)
Adjust Parallel Bushing (Left)
Left Side
Overview
<Lubrication Point>
Left and Right Adjust Parallel Bushings
(outer circumference)
<Lubrication Type>
G-26
<Lubrication Amount>
φ
1mm x 2mm
<Remarks>
• Apply with a syringe.
φ
(Pin Head: 1mm)
Right Side Face
• After lubrication, install and turn the
PG Cam Bush to spread the grease
evenly.
Left Side Face
Figure 6-2. Lubrication (1)
<Lubrication Point>
Contact points of the CR Scale Mounting
Plate (Left/Right) and the Main Frame
<Lubrication Type>
G-26
<Lubrication Amount>
Apply evenly.
<Remarks>
Right Side Apply with a brush.
Figure 6-3. Lubrication (2)
Revision B
151