Epson Stylus Photo 1390 Service Manual page 81

EPSON Stylus Photo 1390/1400/1410
PRINTER COVER
1. Remove the two C.B.P. 3x8 screws that secure the Left Printer Cover Holder, and
draw it out in the direction of the arrow.
Remove the Right Printer Cover Holder in the same way.
Right Printer Cover Holder
Figure 4-14. Removing the Printer Cover Holder
2. Lift the Upper Housing in the direction of the arrows, pull the Guide Pin on the
Upper Housing away from the cutout on the Printer Cover, and remove the Printer
Cover.
DISASSEMBLY AND ASSEMBLY
Left Printer Cover Holder
4) C.B.P. 3x8
(6±1 kgf.cm)
Disassembly/Assembly Procedures
Upper Housing
Guide Pin on the Upper Housing
Figure 4-15. Removing the Printer Cover
Revision B
Printer Cover
Cutout on the Printer Cover
81