EPSON Stylus Photo 1390/1400/1410
15. Lift the Carriage Shaft to the hole of the Main Frame and remove the Spacer and
Left PG Cam from the Carriage Shaft.
Spacer
Figure 4-72. Removing the Left PG Cam
16. Remove the Spacer and Right PG Cam from the Carriage Shaft.
Figure 4-73. Removing the Right PG Cam
DISASSEMBLY AND ASSEMBLY
PG Cam (Left)
Hole on Main
Frame
Right PG Cam
Spacer
Disassembly/Assembly Procedures
When installing the Right PG Cam, make sure that one of these
positions marked "0", "+" or "++" comes to the bottom.
Figure 4-74. Right PG Cam Installation Direction
17. Pull the Right CR Shaft Mounting Plate away from the tab on the Main Frame and
rotate toward you.
Figure 4-75. Rotating the Right CR Shaft Mounting Plate
Revision B
Right CR Shaft
Mounting Plate
Ribs
102