Epson Stylus Photo 1390 Service Manual page 116

EPSON Stylus Photo 1390/1400/1410
4. Remove the six upper Paper Guide Torsion Springs from the tabs on the Main
Frame, and draw out the Upper Paper Guide Torsion Springs from the six Upper
Paper Guide Assys.
Figure 4-113. Removing the Upper Paper Guide Torsion Spring
DISASSEMBLY AND ASSEMBLY
Upper Paper Guide
Tab
Torsion Sprig
Tabs
Upper Paper Guide Assys
Disassembly/Assembly Procedures
Make sure that the leading end of the Upper Paper Guide Torsion
Spring can be seen through the hole of the Upper Paper Guide
Assy.
Shaft
Figure 4-114. Installing the Upper Paper Guide Torsion Spring
5. Lift the six Upper Paper Guide Assys from the Main Frame to release the shaft
(See Figure 4-114), and remove the Upper Paper Guide Assys to the rear.
Figure 4-115. Removing the Top Paper Guide Assy
After replacing the following part, be sure to apply G-26 grease to
A D J U S T M E N T
R E Q U I R E D
the area specified for each part.
Upper Paper Guide Assy
Revision B
Upper Paper Guide
Torsion Sprig
Shaft
Hole
(p.153)
116