Elation Platinum Wash ZFX Pro XL User Manual page 36

Table of Contents

then change to Edit Steps 01. Use the "UP" and "DOWN" buttons to toggle through

the scenes created in "Step 1." Press the "ENTER" button to add a scene to the

program. Tapping the "Enter" button will automatically lock the selected scene into

the programs' memory. Repeat the process until all the desired scenes have been

added to the program. Each program can store a maximum of 64 scenes.

•

To test the program access "Program Test" in the "Program Edit" menu function.

Step 3 – Playing a Program

To initiate a program follow the procedure below:

•

Access the main menu and use the "Up" and "Down" to toggle to "Function Mode"

and tap the "Enter" button.

•

In the next screen select "Auto Program" and tap the "Enter" button.

•

There are two selections, "Master" and "Alone." Select "Master" when running

multiple fixtures in a master/slave configuration. See section 10.2 "Master/ Slave

Operation" on page 33 for proper set-up instructions. Select "Alone" when running a

single fixture or when multiple fixtures in stand-alone mode. See section 10.1

"Stand-Alone Operation" on page 32 for proper set-up instructions.

PLATINUM WASH ZFX PRO XL

™

Table of Contents