Elation Platinum Wash ZFX Pro XL User Manual page 27

Table of Contents

8.3.4 Display Setting –

Shutoff Time -The display is designed to turn off during normal operation to avoid

excessive light in situations that require an extremely dark environment. This

function will adjust the amount of time the display will remain on until it is automatic

turned off. This function is disabled as default.

Display Reverse – This function will allow the entire display to be flipped by 180˚ to

allow for better view when the fixture is hung from truss or a ceiling. This function is

disabled as default.

Key Lock –This function allows you to lock the keys on the display to prevent

tampering. With this function you can activate the automatic key-lock status. If this

function is activated, the keys will be automatically locked in 15 seconds from the

last press. In order to deactivate the key-lock status, press the Mode/Esc-button for

3 seconds.

1. Access the main menu.

2. Tap the UP button until "DISP" is displayed.

3. Press ENTER, the display will show "VALU".

4. Tap the UP button until "LOCK" is displayed and tap the ENTER button.

5. Press the UP button to select "ON" to activate this function, or "OFF" to

deactivate this function.

6. Press ENTER to confirm.

7. Press MEDE/ESC to return to the main menu.

Disp Flash - When activated this function will flash the display when it is not

receiving any type of signal. Use the Up and Down buttons to turn this function On or

Off. Press the Enter button to accept the change or the Mode button to cancel and

return to the main menu. This function is "ON" by default.

8.3.5 Temperature C/F – This function changes the temperature the unit will display

from either Celsius or Fahrenheit. Fahrenheit is set as default.

8.3.6 Initial Status – This function allows a user to create and assign a custom "Home

Position" to the fixture. Adjusting the Pan and Tilt values then locking those values into

PLATINUM WASH ZFX PRO XL

™

Table of Contents