Elation Platinum Wash ZFX Pro XL User Manual page 22

Reset All
Reset Pan/Tilt
Reset Zoom
Test Channel
Manual Control
Calibration
User Mode
Edit User ModeA
Edit User ModeB
Edit User ModeC
Select Program
Edit Program
Edit Scenes
Rec Controler
8.1 Function:
8.1.1 "Set DMX Address" - DMX address setting – This function is used to set or
adjust the fixture's starting DMX address. Every device controlled by DMX has to have a
unique starting address. The addressing feature is what allows DMX to function properly.
The DMX address of a fixture is what allows it to communicate with a controller properly.
The DMX addressing also allows the fixture to ignore any DMX information coming from
the controller that is not meant specifically the fixture. Because each fixture is connected
©Elation Professional®
PAN ......
PAN =XXX
:
Calibrate Password
Color wheel=XXX
:
Standard Mode
Basic Mode
Extended Mode
User Mode A
User Mode B
User Mode C
Max Channel = XX
PAN = CH01
:
Prog. Part 1 = Program 1 ~ 10 Program 1
Prog. Part 2 = Program 1 ~ 10 Program 2
Prog. Part 3 = Program 1 ~ 10 Program 3
Program 1 Program Test
: Step 01=SCxxx
Program 10 Step 64=SCxxx
Edit Scene 001 Pan,Tilt,......
~ Edit Scene 83 --Fade Time--
--Secne Time--
Input By Out
XX~XX
22
PLATINUM WASH ZFX PRO XL
Reset all motors
Reset Pan/Tilt Position Only
Reset Zoom Position Only
Test function
Fine adjustment of the lamp
Password "050"
Calibrate and
effects to standard/right
position
User's mode
channel numbers
Preset User modes
Select programs to be run
Testing program
Program in loop
Save and exit
Save and automatically return
manual scenes edit
Scene record
controller
PLATINUM WASH ZFX PRO XL
™
adjust the
to change
via DMX
™