Elation Platinum Wash ZFX Pro XL User Manual page 23

Table of Contents

in a daisy-chain fashion it is imperative to assign a proper and unique starting DMX

address to each and every fixture. The DMX address is non-destructive and will remain

in the fixture's memory even when the power to the unit is switched off. Memory is

backed-up and retain by an internal power source that should last about five years. For

proper DMX addressing see Section 8/Page 29 of this user manual.

8.1.2

"DMX Value" - Display the DMX 512 value of each channel

With this function you can display the DMX 512 value of each channel. The display will

automatically detail the changing DMX values as they are received from the controller.

8.1.3 "Slave Mode" - Slave setting for Master/Slave Operation

With this function, you can define the device as slave for operation in Master/Slave

mode. Each slave setting will have a different function for a dynamic lightshow without a

controller.

8.1.4 Auto Program

This function allows the internal programs to run in either stand-alone or master/salve

mode. In "Master" mode the fixture will send DMX data to other fixtures connect via the

DMX chain. In "Alone" mode the fixture will operate as a single fixture. The program for

this mode is selected in the "Select program" section of the control menu. You can set

the number of steps under "Edit program". You can edit the individual scenes under

"Edit scenes". With this function, you can run the individual scenes either automatically,

i.e. with the adjusted Step-Time.

8.1.5 Sound Control

This function is similar to the "Auto Program" described in the previous section with the

exception that this function will advance the built-in program via sound.

8.2 Information:

8.2.1 Time Information.

These functions will detail different time functions associated with the fixture.

Current Time

This function displays the running time of the fixture from the last power on. The

PLATINUM WASH ZFX PRO XL

™

Table of Contents