DMX is active. Flashing red and green indicated wireless mode is active but the unit is
not received a wireless signal.
13. Wireless Antenna – This antenna works with the built-in wireless DMX receiver. The
built-in wireless DMX system works with any Elation wireless system or any compatible
"EWDMX" system.
14. 5-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 5-pin
XLR jack.
15. 5-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the
next fixture in the DMX chain via a female, 3-pin XLR jack.
16. 3-PIN DMX Input Jack – This jack accepts an incoming DMX signal via a male, 3- pin
XLR jack.
17. 3-Pin DMX Output Jack – This jack is used to send an incoming DMX signal to the
next fixture in the DMX chain via a female, 3-pin XLR jack.
18. Power Switch – Controls main power to the unit.
19. Fuse Holder Assembly – This assembly houses the 8 amp GMA safety fuse. Always
replace the fuse with an exact match unless otherwise specified by an authorized Elation
Service Technician. Using a fuse other than that specified could seriously damage the
unit and will void your manufactures warranty.
20. Power Cord – Plug into an appropriate power outlet to provide main power to the fixture.
©Elation Professional®
12
PLATINUM WASH ZFX PRO XL
PLATINUM WASH ZFX PRO XL
™
™