Elation Platinum Wash ZFX Pro XL User Manual page 29

protected. The password is 050 and must be entered each time the calibration
menu function is entered. Because calibration is an extremely delicate
procedure instruction on performing this action are left out of this manual. For a
first time calibrator, please contact our customer support team for step-by-step
instructions.
8.6 User Mode Set:
8.6.1 User mode –This function allows the user to create user defined channel orders
allowing the fixture to match the channel order of other fixtures on the market for
easier operation. A total of three user modes may be configured: User Mode A,
User Mode B, and User Mode C.
8.6.2 Edit User mode –This function allows the user to make the actual changes in
the user-defined modes that are created in the previous function.
8.7 Edit Prg: - The fixture comes equipped with a built-in DMX recorder that allows custom
programs to be installed and recalled directly from the fixture's control board. Programs
can be created and stored using the fixture's control board or by using an external DMX
controller. For detailed instructions on how to complete this task please see Section 11/
Page 35.
8.7.1 Select Program –This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in "Function Mode" under
"Program Run."
8.7.2 Edit program – This function allows the user to edit the built-in programs.
8.7.3 Edit Scenes –This function allows the user to edit or define the actual scenes that
are stored in the user defined built-in programs that are accessed in the previous
step.
8.7.4 Rec Controller -The PLATINUM WASH ZFX PRO XL™ features an integrated
DMX recorder. Pre-programmed scenes can be transmitted to the fixture via any
DMX compliant controller. This function allows those scenes to be stored in to the
fixture's built-in memory and then subsequently used to create the user-defined
programs.
©Elation Professional® 29
PLATINUM WASH ZFX PRO XL
PLATINUM WASH ZFX PRO XL
™
™