Elation Platinum Wash ZFX Pro XL User Manual page 28

Table of Contents

the fixture's internal memory creates the new "Home" position.

8.3.7 Wireless DMX

This section will control the functionality of the built-in wireless DMX receiver. See page

37 for more information on operating this fixture via Wireless DMX.

8.3.8 Reset Default – This function is used to restore the fixture's original factory

settings. All settings will be set back to the default values (shaded). Any edited scenes

will be lost.

8.4 Reset Function: The reset function returns a motor to the "Home" position. There are

several reset functions available on this fixture. The list below details the functionality of

each available selection.

8.4.1

Reset All: This function will reset all internal motors to the home position.

8.4.2

Reset Pan and Tilt: This function will only reset the pan and tilt motors to the

home position.

8.4.3

Reset Others: This function will reset all other motors not associated with any in

the previously listed reset commands to the home position.

8.5 Effect Adjust:

8.5.1

Test Channel –This menu function allows the user to select each individual

fixture channel and test it's function independently from the control board.

8.5.2

Manual Control – This function is designed for testing and manual control.

When activated this function will center the pan and tilt motors, open the

shutter, and bring the dimmer to 100%. The pan and tilt function will still operate

if the fixture needs to be positioned to a flat clear surface.

8.5.3

Calibration – This function should only be performed by a technician qualified

to do so. This function allows a user to make small adjustments to the effect

wheels (color, gobo, shutter, etc.) to compensate for ware or in the event a

sensor has been knocked slightly out of place. Because improper use of this

function can result in undesired operation this function has been password

PLATINUM WASH ZFX PRO XL

™

Table of Contents