Elation Platinum Wash ZFX Pro XL User Manual page 26

event either one disrupted during normal operation.
Movement Speed – This function changes the speed function of the Pan and Tilt
motors. There are 3 different mode variations;
Speed 1 (Default): Slower movements for smoother, quitter transitions.
Speed 2: Pan and Tilt speeds are faster by 1 second for quicker movements.
Speed 3: Includes a faster Pan speed. Pan speed is 0.5 seconds faster than
"Speed 2." Tilt speed will be the same as speed 2.
Mic Sensitivity – This function makes the internal microphone more or less
sensitive to sound. This function only works in conjunction with the sound active
modes. The default setting is 70% and setting range from 0% to 99%.
Hibernation -
Standby mode; in this mode the lamp and stepper motors will power off when the
fixture does not receive a DMX signal for at least 15 minutes (Factory default). When
the fixture receives a new DMX signal it will reset and return to the last DMX
position.
8.3.2 Service Setting –
Service Pass- The Password for this function is "50".
RDM PID- With this function you can call up various submenus via RDM when using
a DMX controller with RDM capabilities.
8.3.3 Fans Control –This function is used to change the functionality of the internal
cooling fans. The available selections are:
1) "Auto" The fans will automatically switch between low and high speeds
depending on the internal operating temperature.
2) "High" The fans will run in high-speed mode regardless of operating
temperature.
3) "Low" The fans will remain in low speeds regardless of internal operating
temperature.
©Elation Professional® 26
PLATINUM WASH ZFX PRO XL
PLATINUM WASH ZFX PRO XL
™
™