Set Auto-Update - NTT docomo Style F-01E Instruction Manual

Support
Scanning function (Security Scan)
For the data or programs that are imported to
FOMA terminal, this function detects data and
deletes data or inhibits activation of applications
that may cause troubles.
The Scanning function provides a certain
countermeasure against invasion of data which
causes some trouble in the mobile phone, when
viewing website, receiving messages, etc. Note
that, if pattern definition corresponding to
specific troubles has not been downloaded to
the mobile phone or such pattern definition
does not exist, this function cannot prevent
those troubles from occurring.
Updating pattern definitions
Update pattern definition first, then keep the
pattern definition up-to-date.

Set auto-update

You can set FOMA terminal so that pattern
definitions can be automatically updated.
a meh Settingef
f Scanning functioneb Set auto-
updatee"Enable"e"Yes"e"Yes"e
"OK"
When the Auto-updating pattern definitions is
executed, or
display.
82
Lock/Securitye
appears on the stand-by
Scan result
Warning level
[0] Operation "OK" : Continue processing of the
started application
may not run
properly.
[1] Operation "Yes" : Stop processing of the
application that may cause
may not run
troubles
properly.
"No" : Continue processing of the
Cancel
started application
operation?
[2] Operation "OK" : Stop processing of the
application that may cause
may not run
troubles
properly.
Canceling
operation.
[3] Operation "Yes" : Delete data that may cause
troubles
may not run
"No" : Stop processing of the
properly.
application that may cause
Delete data?
troubles
[4] Operation "OK" : Delete data that may cause
troubles
may not run
properly.
Deleting data.
*Selecting "Detail" on each screen displays a list of names
of the detected problem elements. When 6 or more
problem elements have been detected, the names of the
6th and subsequent problem names are omitted.
Actions