NTT docomo Style F-01E Instruction Manual page 115

Confirming FOMA communication configuration file (driver)
When a PC does not detect FOMA terminal correctly, settings and communication cannot be performed.
<Example> Checking on Windows 7
1
(Start) "
(System and security)"
(System)" category.
Under Windows Vista
Click (Start)
maintenance)"
Under Windows XP
a Click "
(Performance and maintenance)"
b On the "
"
2
Double-click the type of each device Confirm that the name of the following
devices are registered.
Device types and names are shown as below.
The order to be displayed differs depending on
OSs.
- (COM
FOMA F01E Command Port (COMx)
FOMA F01E OBEX Port (COMx)
- (Modem) : FOMA F01E
-
(Universal Serial Bus Controller) or USB
(Universal Serial Bus)
: FOMA F01E
* Depending on the PC environment, x
represents different numbers.
Uninstalling FOMA communication configuration file (driver)
Before operating, refer to "Precautions for installation/uninstallation".
Before operating, remove FOMA terminal from the PC.
<Example> Uninstalling the driver under Windows 7, Windows Vista
1
Click (Start)
(Uninstall programs)" in the "
Under Windows XP
Click " (Start)"
delete Programs)".
2
Select "FOMA F01E USB Driver" and click "
and change)" (for Windows XP, "
3
Confirm that "FOMA F01E Uninstaller" is displayed and click "
The uninstall process starts.
4
If the "
"
" (Control panel)"
" (Device manager)".
(Start)" "
"
(Property of system)" screen, click "
(Device manager)".
LPT) (Port (COM and LPT)) :
*
*
(Controller)
"
"
(Driver deleted)" screen appears, click "OK".
(Control panel)"
(Device manager)" in the "
"
(Control panel)"
(System)".
(Control panel)"
(Control panel)" "
(Change and delete)").
7
"
(System and
"
(Hardware)" tab
P5
"
(Programs)" category.
(Add/
(Uninstall
(Yes)".