NTT docomo Style F-01E Instruction Manual page 125

6
Confirm that "OK" is displayed and click "
7
When confirming disconnection, click "
click "
Setting Show/Hide caller ID
You can set to show/hide call ID for packet communication at once.
Caller ID is your important information. Take care when deciding to disclose your caller ID.
If "Not notify" is set when using mopera U, connection is unavailable.
<Example> Setting under Windows XP
1
Perform Step 1 - 4 in "Setting the dialup connection (APN)".
2
Enter notify/not notify of caller ID in the format "AT
<n> : 0-2
0 : Connect directly (Default)
1 : Connect prefixing 184 (Not notify)
2 : Connect prefixing 186 (Notify)
If nothing is displayed even when AT command is
entered, enter ATE1 and press
3
Confirm that "OK" is displayed and click "
4
When confirming disconnection, click "
click "
❖
Show/Hide caller ID function by dialup network settings
The dialup network settings can also be used to append 186 (Notify)/184 (Not notify) to the dialup
connection number.
The Show/Hide of caller ID when both of the
as shown below.
Setting made by
Dialup network
setting (<cid>=2)
99 2#
184 99 2#
186 99 2#
(End HyperTerminal)".
(No)".
.
(End HyperTerminal)".
(No)".
DGPIR
command No setting
Caller ID is sent
(Yes)" When confirming saving,
(Yes)" When confirming saving,
DGPIR command and dialup network settings are set is
Caller ID is not sent
Caller ID is not sent
Caller ID is not sent
Caller ID is sent
17
(File)" Click "
DGPIR=<n>"
(File)" Click "
Caller ID is sent
Caller ID is sent
.