NTT docomo Style F-01E Instruction Manual page 127

4
Enter the phone number of the dialup connection in "
(Dialup phone number)" ("
with one-byte
(Password)"
<cid> : The number registered in P16 "Setting the dialup connection (APN)"
In "
(Password)", enter the user name and password
specified by your provider or network
administrator.
When the access point is mopera U, you do not
need to enter "
(Password)".
You cannot use "." (one-byte period) at the
beginning of "
the following characters (one-byte) cannot be
used.
/: ?<> "
5
On the connecting screen, click "
Only make settings without connecting to the Internet right away.
6
On the "
screen, click "
Under Windows Vista
a On the "
click "
b Click "
7
On the "
click "
the left of the top.
Under Windows Vista
Click (Start)
8
Right-click the dialup connection created and click "
Enter "
Enter " (Connection name)" and click "
(User name)" and "
(User name)" or "
(Connection name)". Also,
(Close)".
(Set up connection)".
(Close)".
" (Dialup connection)".
99 <cid>#" for packet communication)
(User name)"
(Skip)".
(Preparation for using is completed)"
(Failed in Internet connection test)" screen,
(Network and shared center)" screen,
(Change adapter configuration)" appeared on
19
Enter "
(Connect)".
(Property)".