Client Mode (Sub Unit) - NTT docomo Style F-01E Instruction Manual

Setting Access point (APN)
Set an access point to use for external connection
in AP mode.
mef Toole"Wi-Fi"eb Access
a
point (main)ec Access points (APN)
b
Select an access point (APN)eC
[Save]
Select "<Not recorded>" and press a to
add new APN.
Point
mopera U is registered by default. "mopera U 128k"
is set as the access point (APN).
Setting access point
mef Toole"Wi-Fi"eb Access
a
point (main)ea AP mode ON
local mode ONe"Yes"
By default, a confirmation screen for using AP
mode appears when AP mode ON is set.
b
Set connection on the Wi-Fi device
Register the SSID set in the FOMA terminal to
Wi-Fi device. For operation, see the instruction
manual of the Wi-Fi device. Enter the same
encryption key as one of Authentication type
in Access point settings. If you set MAC
address filter, MAC address on the Wi-Fi
device should be registered in advance.
c
Connect the FOMA terminal and Wi-Fi
device
72

Client mode (Sub unit)

With connecting the access point for small scale
network such as home network or Public wireless
LAN service as a client (Sub unit), you can view
websites or download/upload data in high-speed.
Setting a new network
Register access point information to the FOMA
terminal.
For settings on access point or necessary
information for registration, see the instruction
manual of the access point etc.
mef Toole"Wi-Fi"ea Client
a
mode (sub)ec Network setting
b
Select a method for registering access
b AP
point in the FOMA terminal
or
Point
When entry of encryption key (WEP or PSK) is
required, enter the security key set to the access
point.
Connecting access point
Set Wi-Fi mode to ON to search registered access
point and connect it. Start browser software to use
Internet via Wi-Fi.
a mef Toole"Wi-Fi"ea Client
mode (sub)ea Wi-Fi mode ON