NTT docomo Style F-01E Instruction Manual page 124

❖
Setting the dialup connection (APN)
<Example> Setting under Windows XP
1
Click "
(Accessories)"
(Hyper terminal)".
2
Enter the desired dialup connection name in "
The following characters (one-byte) cannot be
used in " (Name)".
/: ?<> "
3
Enter a fictional phone number (such as "0") for "
Select "
" (Area code)" differs depending on the
PC environment. The code does not relate to
Dialup connection (APN) setup. So no need to
change.
Set as follows at "
field.
For USB cable connection : Select "FOMA F01E".
For Bluetooth connection : Select "
Bluetooth
modem via Bluetooth link you use)" or
"Bluetooth
(Bluetooth modem provided by
Bluetooth device manufacturer)".
4
Click "
5
Enter the dialup connection (APN) in the format "AT+CGDCONT =<cid>,
"<PDP_TYPE>", "<APN>""
<cid> : Enter any number between 2, 5-10.
<PDP_TYPE> : IP or PPP
<APN> : Dialup connection (APN)
+CGDCONT command
command"
If nothing is displayed even when AT command is
entered, enter ATE1 and press
(Start)" Select "
" (Communication)" and click "
(Connection method)"
(Connection method)"
(Standard
Bluetooth
(Cancel)" on the "
P33 "Supplement to AT
.
(Name)"
Click "OK".
(Connect)" screen.
16
(All programs)" "
Click "OK".
(Phone number)"