NTT docomo Style F-01E Instruction Manual page 73

Convenient tools
Wi-Fi
You can make Wi-Fi connection in Access point
mode (Base unit) or Client mode (Sub unit).
The FOMA terminal is compatible with wireless
LAN standards of IEEE802.11b, IEEE802.11g and
IEEE802.11n (client mode only). Base unit and
client device should be compatible with the
same standard to connect.
Note that using Wi-Fi makes battery
consumption faster.
<Connection image>
Internet
FOMA network
In access point mode (Base unit)
F-01E (AP mode)
F-01E
(AP local mode)
In Client mode (Sub unit)
Access point F-01E
Wi-Fi compatible device
Wi-Fi compatible device
Access point (main)
You can use the FOMA terminal as access point
(Base unit) of Wi-Fi to enjoy a versus game etc. on
Wi-Fi device (Sub unit).
There are 2 modes : AP mode in which you can
make on-line communication connecting to FOMA
network and AP local mode which does not
connect to FOMA network.
For using AP mode with the terminal, you need
to subscribe to Internet service provider
(mopera U etc.).
Access point settings
Before making connection in access point mode,
set security for preventing improper use. The
same security method should be set between the
FOMA terminal and Wi-Fi device.
a mef Toole"Wi-Fi"eb Access
point (main)ef Access point settings
b
Set required itemseC [Save]
Select other than "None (open)" in
Authentication type field and press "Set
advanced", and then you can set encryption
key according to the authentication type or
MAC address filter.
71