Setting Communications Without Using Docomo Connection Manager - NTT docomo Style F-01E Instruction Manual

Style series
Table of Contents

Advertisement

Setting communications without using DOCOMO
Connection Manager
The method of dialup connection setup without DOCOMO Connection Manager is explained.
Flow of dialup network setting
Flow of setup for data communication
Before operating, make sure that a PC and FOMA terminal are properly connected.
* Set for packet communication.
Communication software to input AT commands is required for settings.
The method of setting using "
explained here. Windows 7 and Windows Vista do not support "
Windows 7 and Windows Vista, set using the software supported by Each OS (Follow the method for the
software to be used.).
Setting the dialup connection (APN)
The dialup connection (APN) and registration number (cid)
The dialup connections (APN) for packet communication can be set for registration numbers (cid) between
1 and 10 in FOMA terminal. By default, "mopera.net" (APN) to connect to mopera U is registered in cid1 and
3, and "mpr.ex-pkt.net" (APN) to connect in 128K communication is registered in cid4. For connecting to
other providers or corporate LANs, register APN for cid2, 5-10.
For the dialup connections (APN), inquire your provider or network administrator.
For USB cable connection and Bluetooth connection, setting each dialup connections (APN) is required.
For packet communication, if switching between USB cable connection and Bluetooth connection,
setting the dialup connections (APN) is required again.
The dialup connection settings can be considered as phonebook entries registered for packet
communication. The comparison between dialup connection settings and FOMA terminal phonebook is
as shown below.
Connection (APN)
Registration number (cid)
Connection name (APN)
99
<cid># (packet communication)
The registered cid become the connection number in the dialup connection numbers setting.
P4
Setting the dialup connection (APN)
When the access point is mopera U, you do not need to set.
Setting Show/Hide caller ID
Set as required.
Setting Dialup Network
For Windows 7, Windows Vista P18
For Windows XP P21
Registration number (Phonebook No.)
Party's name
Party's phone number
P15
P17
(Hyper terminal)" that comes with Windows XP is
Phonebook item
15
(Hyper terminal)". For

Advertisement

Table of Contents
loading

Table of Contents