Handling Mobile Phones Near Electronic Medical Equipment; Material List - NTT docomo Style F-01E Instruction Manual

Handling mobile phones near
electronic medical equipment
These precautions are based on the guidelines
produced at the Electromagnetic Compatibility
Conference Japan, regarding the protection of
electronic medical equipment from radio waves
emitted by mobile phone units.
WARNING
Obey the following rules inside medical
facilities.
Do not bring FOMA terminal into operating
Do
rooms (ORs), intensive care units (ICUs) or
coronary care units (CCUs).
Turn FOMA terminal OFF in hospital wards.
Turn FOMA terminal OFF in hospital lobbies
and corridors if electronic medical equipment
could be nearby.
If the medical facility has specified zones
where use or possession of mobile devices is
prohibited, obey those instructions.
If the function to automatically turn ON the
power is set, cancel the setting before turning
the power OFF.
Turn FOMA terminal OFF in crowded
trains or other public places where
pacemaker or defibrillator wearers
Do
could be nearby.
FOMA terminal's signals may affect the
operation of implanted pacemakers or
defibrillators, and other devices.
Wearers of electronic medical
equipment such as implanted
pacemakers or defibrillators must carry
Do
and use FOMA terminal at least 22 cm
away from the implanted device.
FOMA terminal's signals may affect the
performance of electronic medical equipment.
When electronic medical equipment
other than implanted pacemakers or
defibrillators are in use outside of
Do
medical facilities (such as in home care
settings), check with the device
manufacturer to determine how the
device is affected by electrical signals.
FOMA terminal's signals may affect the
performance of electronic medical equipment.

Material list

Part
Exterior Movable part
case Sub-Display
Movable
part Display
Fixed part
Keypad
Fixed part
Battery
Hinge section
Movable side
Hinge section
Fixed side
Back cover
Back cover
plate
Back cover
lock lever
Back cover
lock plate
Case pad
Display panel
Back panel
Surface
Material
treatment
PC+GF resin UV hard coating
PA-GF resin UV hard coating
PA-GF resin UV hard coating
PC+ABS resin UV hard coating
PC+ABS resin UV hard coating
PC+ABS resin UV hard coating
PC+ABS resin UV hard coating
PC sheet, None
silicon rubber
POM resin Engraving
Stainless steel None
Urethane resin None
High-intensity UV hard
acrylate resin coating
Acrylate UV hard coating
resin+PC resin
13