Handling Docomo Mini Uim Card; Handling Mobile Phones Near Electronic Medical Equipment; Material List - NTT docomo F-05D Instruction Manual

Always remove the power plug from the
cigarette lighter socket when cleaning the
equipment.
Unplug
May cause fire, burns, electric shock.

◆ Handling docomo mini UIM card

CAUTION
Be careful of the cut surface when removing
docomo mini UIM card.
May cause injuries.
Do
◆ Handling mobile phones near
electronic medical equipment
■ These precautions are based on the guidelines
produced at the Electromagnetic Compatibility
Conference Japan, regarding the protection of
electronic medical equipment from radio waves
emitted by mobile phone units.
WARNING
Obey the following rules inside medical
facilities.
･
Do not bring the terminal into operating rooms
Do
(ORs), intensive care units (ICUs) or coronary care
units (CCUs).
･
Turn the terminal OFF in hospital wards.
･
Turn the terminal OFF in hospital lobbies and
corridors if electronic medical equipment could be
nearby.
･
If the medical facility has specified zones where use
or possession of mobile devices is prohibited, obey
those instructions.
Turn the terminal OFF in crowded trains or
other public places where pacemaker or
defibrillator wearers could be nearby.
Do
The terminal's signals may affect the operation of
implanted pacemakers or defibrillators, and other
devices.
Wearers of implanted pacemakers or
defibrillators must carry and use the terminal
at least 22 cm away from the implanted
Do
device.
The terminal's signals may affect the operation of
implanted pacemakers or defibrillators, and other
devices.
When electronic medical equipment other
than implanted pacemakers or defibrillators
are in use outside of medical facilities (such
Do
as in home care settings), check with the
device manufacturer to determine how the
device is affected by electrical signals.
The terminal's signals may affect the performance of
electronic medical equipment.

◆ Material list

Part
Exterior Front case
case
Back case
Back cover
Inside of
back cover
Display panel
Receiver panel
1Seg Antenna top PC/ABS
antenna
Antenna rod Stainless
Antenna
holder
11
Surface
Material
treatment
PA-GF resin UV hard coating
PC-GF resin UV hard coating
PC-GF resin UV hard coating
Silicon None
rubber
Hardened Shatterproof film
glass
High- UV hard coating
strength
acrylate
resin
UV hard coating
resin
None
steel
Zinc die- Ni plating
cast
Contents/Precautions