Location And Function Of Parts; Front Panel - Sony Trimaster PVM-L2300 Operation Manual

Lcd video monitor
Hide thumbs Also See for Trimaster PVM-L2300:
Table of Contents

Advertisement

Location and Function of Parts

Front Panel

6 OPTION B
connector
5 OPTION A
connector
a Tally lamp
With factory settings, the tally lamp lights when pins No. 8
and No. 9 of the PARALLEL REMOTE connector on the
left side panel are shorted. By changing the setting in the
Parallel Remote menu, different pins on the PARALLEL
REMOTE connector can be used to control the tally lamp.
For information about the Parallel Remote menu, see
"Parallel Remote" (page 63) of the System Configuration
Menu.
b OPERATE lamp
Lights in red when the monitor is in standby mode. The
monitor will be in standby mode under the following
conditions:
• Standby Mode is set to On in the Power menu of the
System Configuration menu and the MAIN POWER
switch (on the rear panel) is turned on. (The OPERATE
lamp will flash for initialization after the switch is turned
on, then will light.)
• The monitor is changed from operation mode to standby
mode by external control.
Lights in green when the monitor is put into operation
mode from standby mode by pressing the MONITOR I/1
switch of the controller.
For information about the Power menu, see "Power"
(page 64) of the System Configuration Menu.
Notes
• When the lamp is flashing in red, the monitor cannot be
put into operation mode. (Internal data initialization is
taking place.) Wait until the lamp is steadily lit.
• The lamp may show the error, warning or operation
mode.
For details, see "Error/warning/operation mode display
by the lamp" on page 14.
c STATUS lamp
Lights in blue when the error is detected.
For details, see "Error/warning/operation mode display
by the lamp" on page 14.
d OVER RANGE lamp
Lights in orange when the picture is displayed in black
detail mode or when the dynamic range of the following
item is exceeded.
• Contrast (contrast)
Flashes when the luminance is decreased to protect the
monitor from a rise in temperature.
1 Tally lamp
2 OPERATE lamp
3 STATUS lamp
4 OVER RANGE lamp
Location and Function of Parts
13

Advertisement

Table of Contents
loading

Table of Contents