Sony Trimaster PVM-L2300 Operation Manual page 44

Menu
Color Temp Adj
Manual
Manual Adjust
Original Value
Signal
44
Adjustment Menu
Function and operation ([
Adjusts the color temperature.
When the item is selected, the color temperature data to be adjusted is displayed.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
To change the color temperature data to be adjusted, select D93, D65, User1, User2, User3,
User4 or User5 in the Color Temp menu of the Input Configuration menu.
For information about the Input Configuration menu, see page 48.
Adjusts the color temperature manually.
When the item is selected, the color temperature data to be set is displayed.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
For information about the Input Configuration menu, see page 48.
Adjusts the color temperature with the adjustment knob.
Note
This menu is not selectable when the contrast is set to less than 400.
When the item is selected, the color temperature adjustment display appears and the x and y
values of the color temperature data to be adjusted are displayed.
Note
The displayed chromaticity coordinates x and y are reference values and are not guaranteed
as absolute values.
When Contrast Hold is set to On, the adjustable item and the relevant knobs are as follows.
To adjust Red (red): BRIGHT knob
To adjust Green (green): CHROMA knob
To adjust Blue (blue): PHASE knob
When Contrast Hold is set to Off, the adjustable item and the relevant knobs are as follows.
To adjust Red (red): BRIGHT knob
To adjust Green (green): CHROMA knob
To adjust Blue (blue): PHASE knob
To adjust Contrast (contrast): CONTRAST knob
To hide the characters on the monitor during manual adjustment
Set the CHAR OFF button of the controller to on. As the characters on the display are
hidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFF
button to off.
To reset Red, Green and Blue to the value before adjustment
Press the MANUAL button of BRIGHT, CHROMA or PHASE. The Red, Green and Blue are
reset to the value before adjustment.
To reset Contrast to the value before adjustment
Press the MANUAL button of CONTRAST.
Note
You cannot reset the setting after you press the ENTER (Ent) button.
To cancel adjustment
Press the MENU button. The adjustment data is cleared and the setting returns to the
previous value.
To confirm adjustment
Press the ENTER (Ent) button.
Sets the initial value.
You can select from D93, D65, User1, User2, User3, User4 or User5.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
Sets the white signal to be used for adjustment.
Internal: Select when an internal signal is used. The signal is automatically switched to
the 100% white signal.
[External]: Select when an external input signal is used. Supply the 100% white signal.
Note
When the signal format set in the Format menu of the Input Configuration menu is DVI
Computer or the computer signal of HDMI, this menu is not selectable. Input the 100% white
signal.
]: factory setting)