Sony Trimaster PVM-L2300 Operation Manual page 65

Menu
Power On Status
Default CH
On Screen Set
Input Information
Format
Position
CH No
Position
CH Name
Position
Scan Mode
Position
Closed Caption
Closed Caption
Type
Service 708
Service 608
OSD Level
Password
Function and operation ([
Sets the input channel when the power is turned on.
[Last]: Sets to the channel that was selected at the time the power was last turned off.
CH: Sets to the channel number specified in Default CH.
Selects the channel (01 to 30) when the Power On Status is set to CH. [01]
Sets the items for the screen display.
Sets the display of the input information.
Sets the display mode of the signal system.
[Auto]: Disappears after being displayed for a while.
On: Always displayed.
Off: Not displayed.
Sets the display position for the signal system.
You can select from Top Left (top left), Top Center (top center), Top Right (top right),
[Bottom Left] (bottom left), Bottom Center (bottom center) or Bottom Right (bottom right).
Sets the display mode of the channel number.
[Auto]: Disappears after being displayed for a while.
On: Always displayed.
Off: Not displayed.
Sets the display position for the channel number.
You can select from Top Left (top left), Top Center (top center), [Top Right] (top right),
Bottom Left (bottom left), Bottom Center (bottom center) or Bottom Right (bottom right).
Sets the display mode of the channel name.
[Auto]: Disappears after being displayed for a while.
On: Always displayed.
Off: Not displayed.
Sets the display position for the channel name.
You can select from [Top Left] (top left), Top Center (top center), Top Right (top right),
Bottom Left (bottom left), Bottom Center (bottom center) or Bottom Right (bottom right).
Sets the display mode of the scan mode.
[Auto]: Disappears after being displayed for a while.
On: Always displayed.
Off: Not displayed.
Sets the display position for the scan mode.
You can select from Top Left (top left), Top Center (top center), Top Right (top right),
Bottom Left (bottom left), Bottom Center (bottom center) or [Bottom Right] (bottom right).
Sets the items for the closed caption display.
When the BKM-244CC is installed, you can select the item.
The setting is effective for the input signal of the BKM-244CC.
Sets whether or not to display closed caption signal ([Off] or On).
Sets the closed caption type.
[708]: Select to display the closed caption signal of the EIA/CEA-708 standards.
608 (708): Select to display the closed caption signal of the EIA/CEA-608 standards
transmitted by EIA/CEA-708 standards.
608 (ANC): Select to display the closed caption signal of the EIA/CEA-608 standards
transmitted as the ancillary data
608 (VBI): Select to display the closed caption signal of the EIA/CEA-608 standards
transmitted by using the line 21.
Sets Service when Type is set to 708.
You can select from Service1 to Service6. [Service1]
Sets Service when Type is set to 608 (VBI), 608 (ANC) or 608 (708).
You can select from CC1 to CC4 or Text1 to Text4. [CC1]
Sets the luminance of the letter.
You can select from [100IRE] (bright), 50IRE or 30IRE (dark).
Sets the password for the menu.
Enter a four-digit number for the password. [9999]
]: factory setting)
65
System Configuration Menu