Sony Trimaster PVM-L2300 Operation Manual page 50

Menu
HDMI Auto
Sync Mode
Color Temp
Picture Preset
Matrix/Gamma
50
Input Configuration Menu
Function and operation ([
Sets the manual or automatic setting for the aspect ratio of the HDMI signal.
Off: Select to set the aspect ratio manually with the controller, etc.
[On]: Select to set the aspect ratio automatically according to the input signal. The
aspect ratio is not set with the controller, etc.
Sets the sync signal when the analog component signal or analog RGB signal is input.
You can select when Format is set to Component YPbPr or Component RGB.
[Internal]: Select when an internal sync signal is used.
External: Select when an external sync signal is used.
Sets the color temperature.
You can select from D93, D65 or User1 to User5.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
Sets the picture adjustment preset.
Select from Preset1 to Preset5.
Sets Matrix/Gamma data (transmission matrix and transmission gamma) depending on the
input signal format.
Matrix/Gamma data are seven data in which the transmission matrix and transmission
gamma have been preset and five user data in which the transmission matrix and
transmission gamma can be selected respectively (see below table).
Preset data: ITU-R BT.709, ITU-R BT.601, SMPTE 240M, xvYCC 709, xvYCC 601
Data set respectively: User1 to User5
The Matrix/Gamma data can be set for each type of the input signal (HD, SD or DVI/HDMI
Computer).
For the type of the input signal, see "Matrix/Gamma Setting Table" (page 105).
Matrix/Gamma Matrix
(Transmission
matrix)
ITU-R BT.709 ITU709
ITU-R BT.601 ITU601
SMPTE 240M SMPTE240M
xvYCC 709 ITU709
xvYCC 601 ITU601
User1 to User5 ITU709
ITU601
SMPTE240M
Select above three
types.
Matrix/Gamma data
ITU-R BT.709: Select when the signal of the ITU-R BT.709 standards format is input.
ITU-R BT.601: Select when the signal of the ITU-R BT.601 standards format is input.
SMPTE 240M: Select when the signal of the SMPTE-240M standards format is input.
xvYCC 709: Select when the IEC 61966-2-4 standards (xvYCC) and the transmission
matrix ITU-R BT.709 standards format signal is input.
xvYCC 601: Select when the IEC 61966-2-4 standards (xvYCC) and the transmission
matrix ITU-R BT.601 standards format signal is input.
User1 - User5: Select when the transmission matrix and transmission gamma is set
individually depending on the input signal format.
Notes
• When you select xvYCC 709 or xvYCC 601, set Emulation (page 53) to PVM-L2300 Native
in the Color Gamut menu of the Display Setting menu to display the extended color gamut
area.
• For setting the user data (User1 to User5) of Matrix/Gamma, see the User Matrix/Gamma
menu (page 53) of the Display Setting menu.
]: factory setting)
Gamma (Transmission
gamma)
2.2
2.2
2.2
xvYCC
xvYCC
2.2
xvYCC
Select above two types.