Sony Trimaster PVM-L2300 Operation Manual page 52

Menu
RGB Range
DVI Video
DVI Computer
HDMI
HDMI Auto
1080I/PsF
24PsF
25PsF/50I
30PsF/60I
Copy From
Other CH
Other Monitor
Monitor ID
Memory Stick
52
Input Configuration Menu
Function and operation ([
Sets the quantization range of the DVI or HDMI input signal.
You can select when Format is set to DVI Video, DVI Computer or HDMI.
Sets the display mode for the DVI Video signal.
Full: 0 (black level) to 255 (white level) (8bit)
[Limit]: 16 (black level) to 235 (white level) (8bit)
Sets the display mode for the DVI Computer signal.
[Full]: 0 (black level) to 255 (white level) (8bit)
Limit: 16 (black level) to 235 (white level) (8bit)
Sets the display mode for the HDMI signal.
Full: 0 (black) to 255 (8bit)/1023 (10bit)/4095 (12bit) (white level)
[Limit]: 16 (8bit)/64 (10bit)/256 (12bit) (black level) to 235 (8bit)/940 (10bit)/3760 (12bit)
(white level)
Sets the manual or automatic setting for the quantization range of the HDMI signal.
Off: Select to use the quantization range set in the HDMI menu.
[On]: Select to set the quantization range automatically according to the input signal.
When the 1080i/PsF signal is input, select the display mode.
You can select when Format is set to HD-SDI/D1 Auto, 4:2:2 YPbPr 10bit, 4:4:4 YPbPr 10bit,
4:4:4 RGB 10bit, 4:4:4 YPbPr 12bit, 4:4:4 RGB 12bit, Component YPbPr or Component
RGB.
When 1080I is selected, the I/P conversion signal is displayed. When 1080PsF is selected,
the progressive conversion (PsF to P) signal is displayed.
When the 1080PsF signal is input and 1080I is selected, the display delay is shortened. The
signal converted from PsF to P is not displayed and the I/P conversion signal is displayed.
Sets the display mode for the 1080/24PsF signal.
You can select from 1080I or [1080PsF].
Sets the display mode for the 1080/25PsF, 50i signal.
You can select from [1080I] or 1080PsF.
Sets the display mode for the 1080/30PsF, 60i signal.
You can select from [1080I] or 1080PsF.
Copies signal setting data from other channel.
Copies other data in this monitor.
When the item is selected, you can designate the channel to be copied.
Copies data from other monitor.
Enters the ID number of the source monitor.
When the NETWORK switch is set to PEER TO PEER, this is not selectable.
When the item is selected, you can designate the source monitor.
When the ID number is entered, you can designate the channel to be copied.
Copies data in the "Memory Stick".
When the item is selected, the file names in the source "Memory Stick" are displayed.
When the file is selected, you can enter the channel number in the selected file.
]: factory setting)