Input/Output Connector And Adaptor - Sony Trimaster PVM-L2300 Operation Manual

Note
The signal from the MONITOR OUT connector of the
BKM-220D does not satisfy the ON-LINE signal
specifications.
BKM-227W NTSC/PAL Input Adaptor
Includes a decoder for NTSC/PAL/PAL-M/SECAM
signals. Input/output connectors for each one composite
signal channel and Y/C signal channel are equipped.
BKM-229X Analog Component Input Adaptor
Includes a decoder for analog component signals and
analog RGB signals. Input connector for one channel is
equipped.
BKM-243HS HD/D1-SDI Input Adaptor
Includes a decoder for serial digital component signals.
Input/output connectors for two serial digital channels and
output connector for one monitor channel are equipped.
Note
The signal from the MONITOR OUT connector of the
BKM-243HS does not satisfy the ON-LINE signal
specifications.
BKM-244CC HD/SD-SDI Closed Caption
Adaptor
Includes a decoder for serial digital component signals.
EIA/CEA-608 or EIA/CEA-708 standard closed caption
signals superimposed on the SDI signals are decoded and
displayed. Input/output connectors for two serial digital
channels and output connector for one monitor channel are
equipped.
Note
The signal from the MONITOR OUT connector of the
BKM-244CC does not satisfy the ON-LINE signal
specifications.
Caution
When you install the following input adaptors to this
equipment, use those with the serial numbers given below.
• BKM-220D with serial number 2100001 or higher
• BKM-229X with serial number 2200001 or higher
• BKM-243HS with serial number 2108355 or higher
BKM-220D: This equipment may not meet the
requirements of the electromagnetic interference standard
if designated input adaptors are not installed.
BKM-229X: This equipment may not work correctly or
you may not be satisfied with the performance if
designated input adaptors are not installed.
BKM-243HS: This equipment may not meet the
requirements of the electromagnetic interference standard
or work correctly, or you may not be satisfied with the
performance if designated input adaptors are not installed.

Input/Output Connector and Adaptor

By adding the optional input expansion adaptors, the input/
output connector panel can be assembled in a wide variety
of configurations. The signals that each of the adaptors'
connectors supports are given in the following table. The
type of signal to be applied to each input/output connector
is set with the Input Configuration menu.
For information about the Input Configuration menu, see
page 48.
Input adaptor BKM-
Input signal
Component 525/
625
Single-link HD-SDI
Dual-link HD-SDI
Composite NTSC
Composite PAL
Composite PAL-M
Composite
SECAM
Y/C NTSC
Y/C PAL
Y/C PAL-M
Y/C SECAM
YPbPr 525i/625i
RGB 525i/625i
YPbPr/RGB
1080/24PsF
YPbPr/RGB
1080/24P
YPbPr/RGB
1080/50i (25PsF)
YPbPr/RGB
1080/25P
YPbPr/RGB
576/50P
YPbPr/RGB
480/60P
YPbPr/RGB
1080/60i (30PsF)
YPbPr/RGB
1080/30P
YPbPr/RGB
720/50P
YPbPr/RGB
720/60P
Number of digital inputs
BKM- BKM- BKM-
220D 227W 229X 243HS/
244CC
a a
a
a(2)
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
2 – – 2
Options
11