Options - Sony Trimaster PVM-L2300 Operation Manual

using a commercially available probe (Konica Minolta
CA-210, DK-Technologies PM5639/06, X-Rite Eye-One
Pro).
Other features
• The color temperature is selectable from D65, D93 and
User.
• Built-in test pattern for 100% white signal, 20% gray
signal, 0% black signal, PLUGE (Picture Line Up
Generation Equipment) signal, color-bar signal, 5 step
gray scale signal and ramp signal.
• Chroma Up function that increases the chroma setting by
12 dB.
• Blue only function and RGB cut off function to monitor
signal noise.
• A parallel remote of the contact point control connector
is equipped.
10

Options

Options
For external control
BKM-16R Monitor Control Unit
The BKM-16R is a controller of the PVM-L2300 and you
can control multiple monitors from one controller.
In this manual, the BKM-16R is referred to as the
controller.
For installation
BKM-37H Controller Attachment Stand
Used to join a BKM-16R and the PVM-L2300.
When the stand is attached to the PVM-L2300, you can
adjust the monitor angle up or down.
BKM-38H Controller Attachment Stand
Used to join a BKM-16R and the PVM-L2300.
SMF-700 Monitor Interface Cable
Used to connect the PVM-L2300 to the BKM-16R.
BKM-23M Monitor Protection Panel
The BKM-23M is a panel to protect the LCD panel of the
PVM-L2300.
Input adaptors
The input connector panel is composed by installing the
optional input adaptor into the input option slot at the left
side of the monitor. Up to four adaptors can be installed to
the monitor.
The input signal type for each connector of the adaptor is
set with the Input Configuration menu, in accordance with
the configuration of the connector panel.
Note
When installing the adaptor, be sure to perform the
necessary input signal setup with the Input Configuration
menu. If the setup is not performed, the adaptors may not
function correctly.
For information about the Input Configuration menu, see
page 48.
For details of each input adaptor, refer to the operating
instructions of each model.
BKM-220D SDI 4:2:2 Input Adaptor
Includes a decoder for serial digital signals (525/625
component). Input/output connectors for two serial digital
channels and output connector for one monitor channel are
equipped.