Location And Function Of Parts And Controls - Sony TRINITRON PVM-1953MD Service Manual

Location and Function of Parts and Controls
PVM-1953MD
Front Panel
ecco a0
Boon oo 000000-4
@ 2 CHROMA (chrominance) control
Turn clockwise to make the color intensity stronger and
counterclockwise to make it weaker.
C1) Tally indicator
This indicator lights up when the video camera
connected to this monitor is selected, indicating that the
picture is being recorded. The tally control connection is
needed.
For the pin assignment, see "Specifications" on page 14.
© ©: BRIGHT (brightness) control
Turn clockwise for more brightness and
counterclockwise for less.
© © POWER switch and indicator
Depress to turn the monitor on. The indicator will light
up in green. To turn the power off, press this again.
© © APERTURE control
Turn clockwise for more sharpness and
counterclockwise for less.
When the control is set to MIN, the picture becomes flat
without need for corrections.
© REMOTE indicator
This indicator lights up in the conditions below:
— When PRESET is set to ON in the menu.
— When REMOTE (RS-232C) is set to REMOTE
ONLY or REMOTE & LOCAL in the menu, or
— When REMOTE ON is set via the REMOTE 1
The APERTURE,-CHROMA, PHASE control settngs
have no effect on the pictures of RGB signals.
terminal.
@ MENU (EXIT) button
Press to make the menu appear.
Press to return to the previous screen in the menu.
O = VOLUME control
Turn this control clockwise or counterclockwise to
obtain the desired volume.
@ ENTER (SELECT) button
Press to decide a selected item in the menu.
® ¢ (+) $ ) buttons
Press to move the cursor (P) or adjust selected valie in
the menus.
© 0 CONTRAST control
Turn clockwise to make the contrast stronger and
counterclockwise to make it weaker.
© ~ PHASE control
This control is effective only for the NTSC color
system. Turn clockwise to make the skin tones greenish
4 and counterclockwise to make them purplish.