Table of Contents
Advertisement
Overview
The BVM-D9H1U/D9H1E/D9H1A/D9H5U/D9H5E/
D9H5A are 9 -inch Trinitoron
®1)
Color Monitors. The
BVM-D14H1U/D14H1E/D14H1A/D14H5U/D14H5E/
D14H5A are 14-inch
2)
Trinitoron
®
Color Monitors.
Features
Multiformat
The monitor supports the principal format (480I/480P/
720P/1080I) for the digital broadcasts, NTSC and PAL
3)
color systems, and a wide variety of signals
whose
horizontal frequency is between 15 kHz and 45 kHz.
High resolution picture tube
The HR Trinitron picture tube produces a clear, high
resolution image.
Aperture
Resolution at the
Model
grille pitch
center of the picture
BVM-D9H1U/
0.25 mm
450 TV lines (4:3)
D9H1E/D9H1A/
340 TV lines (16:9)
D9H5U/D9H5E/
D9H5A
BVM-D14H1U/
0.25 mm
800 TV lines (4:3)
D14H1E/D14H1A/
600 TV lines (16:9)
D14H5U/D14H5E/
D14H5A
Separate control unit (BVM-D9H1U/D9H1E/
D9H1A/D14H1U/D14H1E/D14H1A)
Using a separate control unit reduces the space needed
for the equipment.
The monitor is controlled by a separate control unit,
such as an optional BKM-10R/11R Monitor Control
Unit or by daisy chain connections.
Controlling monitor groups
Up to 32 monitors can be controlled from one control
unit by the RS-485 serial remote connections. You can
control individual monitors or monitor groups simply
by entering monitor address or group numbers. You
can also execute the same operation on all connected
monitors, or put all connected monitors into the same
setup and adjustment state.
........................................................................................................................................................................................................
1) Trinitron
®
is a registered trademark of Sony Corporation.
2) 9-inch and 14-inch refer to the CRT size of the monitor.
For effective picture size, see "Specifications" on page 47(E).
3) For details on the signal format, see "Available Signal Format" on page
53(E).
4
(E)
Auto chroma phase and white balance
functions
The chroma and phase of the decoder are
automatically adjusted with the auto chroma phase
function and the color temperature is automatically
adjusted with the auto white balance function by using
the BKM-14L Auto Setup Probe, etc.
4:3 area marker
It is possible to check the 4:3 aspect area in the 16:9
picture by displaying the 4:3 marker.
Expandable input capability
You can obtain HD SDI signals, D1 SDI signals,
NTSC/PAL signals or YP
P
/RGB signals by
B
R
installing the optional input adaptors at the rear of the
monitor. The input connector configuration can be
easily modified and up to three adaptors can be
installed. The BKM-129X Analog Component Input
Adaptor is installed at SLOT 1 at the factory.
Stable color temperature
The beam current feedback circuit maintains a constant
color temperature over long periods of time.
Blue-only mode convenient for monitoring
noise
All three CRT cathodes can be driven with a blue
signal, producing a monochrome display. This mode is
convenient for chroma and phase adjustment, and for
monitoring VTR noise.
Other features
• The monitor's various functions and operating
conditions can be set with on-screen menus.
• Has both RS-485 serial remote and relay contact
parallel remote control connectors.
• H delay and V delay functions for simultaneous
checking of the horizontal and vertical
synchronization signals. VITS (Vertical Interval Test
Signal) checking is also possible.
• Auto and manual degaussing.
• The monitor may be mounted in an EIA-standard 19-
inch rack, using an optional MB-520 (for 9-inch
monitor) or BKM-30E14/31E14 (for 14-inch
monitor) Rack Mount Kit.
• The appearance of the monitor can be changed to
16:9 or 4:3 display by the replacement of a mask.
• Operable by using a Sony lithium ion battery (BP-
L60/L90A) or DC 12 V external power source.
(BVM-D9H1U/D9H1E/D9H1A/D9H5U/D9H5E/
D9H5A only)
• Built-in audio reproduce circuit and speaker. (BVM-
D9H5U/D9H5E/D9H5A only)
Options
For external control
BKM-10R Monitor Control Unit
A controller for the BVM-D9H/D14H series video
monitors, allowing you to control multiple monitors
from one control unit.
BKM-11R Monitor Control Unit
A controller for the BVM-D9H/D14H and other BVM/
HDM series video monitors, allowing you to control
multiple monitors from one control unit.
BKM-14L Auto Setup Probe
A probe, allowing the automatic adjustment of this
monitor's color temperature.
For installation
MB-520 Mounting Bracket
Mounting bracket to mount one or two BVM-D9H1U/
D9H1E/D9H1A/D9H5U/D9H5E/D9H5A in a 19-inch
EIA standard rack.
MB-519 Mounting Panel
Panel for the BVM-D9H1U/D9H1E/D9H1A to fill up
the space created when mounting a video monitor to a
rack with the MB-520 mounting bracket.
MB-509 Mounting Panel
Panel for the BVM-D9H5U/D9H5E/D9H5A to fill up
the space created when mounting a video monitor to a
rack with the MB-520 mounting bracket.
BKM-30E14 Rack Mount Kit
Rack mount kit for mounting the BVM-D14H5U/
D14H5E/D14H5A in an EIA standard 19-inch rack.
BKM-31E14 Rack Mount Kit
Rack mount kit for mounting the BVM-D14H1U/
D14H1E/D14H1A in an EIA standard 19-inch rack.
Others
VF-508 Monitor ENG Kit
Kit that includes a light intercepting hood which is
mounted on the front of a monitor, and a connector
protector which is mounted on the rear.
Input adaptors
The input connector panel is configured by sliding the
optional input adaptor into the input option slot at the
rear of the monitor. Up to three adaptors can be
installed to the monitor.
The input signal type for each connector of the adaptor
is set with the INPUT CONFIG menu, in accordance
with the configuration of the connector panel.
Note
When installing the adaptor, be sure to perform the
necessary input signal setup with the INPUT CONFIG
menu. If the setup is not performed, the adaptors may
not function correctly.
For information about the INPUT CONFIG menu, see "[C]
Setting the Input Configuration — INPUT CONFIG Menu"
on page 35(E).
5
(E)
Hide quick links:
Advertisement
Table of Contents
