Removing the Monitor
To install the monitor on a rack, or use the optional SU-
561 Monitor Stand, remove the bottom stand as follows.
Put the monitor on a soft cloth with the surface of
the monitor downward.
Remove the three screws.
Remove the stand.
Installing on a Rack
You can install PVM-1741A to the rack by using the
supplied mounting bracket.
Attach the mounting bracket to the monitor with
Attach the unit to the rack with four screws.
The screws are not supplied. Prepare screws according
to the rack.
Removing the Monitor Stand (Pre-Attached) / Installing on a Rack (PVM-1741A only)