Removing The Monitor Stand (Pre-Attached); Attaching The Handle (Lmd-A220/A180 Only) - Sony LMD-A240 Operating Instructions Manual

Removing the Monitor
Stand (Pre-Attached)
To install the monitor on a rack, remove the bottom
stand as follows.
1
Put the monitor on a soft cloth with the surface of
the monitor downward.
2
Remove the two screws.
3
Remove the stand.
12
Removing the Monitor Stand (Pre-Attached) / Attaching the handle (LMD-A220/A180 only)
Attaching the handle
(LMD-A220/A180 only)
The handle (supplied) can be attached to the rear panel
using the four screws (supplied).