Download  Print this page

Sony Trimaster PVM-2541A Operating Instructions Manual Page 33

Professional video monitor.
Hide thumbs

Advertisement

Submenu
Setting
FORCED TALLY
The tally lamp function is forcibly
assigned to 7 pin and 8 pin of the
PARALLEL REMOTE connector.
Selecting ON assigns tally lamp
green to 7 pin and tally lamp red to
8 pin.
Note
When OFF is selected, any listed
functions can be assigned to 7 and 8
pins. Selecting ON with any
function other than the tally lamp
assigned to 7 and 8 pins will ignore
this setting, and the tally lamp is
forcibly assigned to 7 and 8 pins
instead.
ON: Forcibly assigns the
tally lamp function.
OFF: The tally lamp
function is not forcibly
assigned.
SERIAL REMOTE
Submenu
Setting
SERIAL REMOTE
Selects the mode to be used.
• OFF: SERIAL REMOTE does
• ETHERNET: The monitor is
• BKM-15R/16R: Sets BKM-
MONITOR
Sets the monitor setting.
CONTROLLER
Sets the address of the remote
controller.
CONNECTION
Sets the connection of the monitor
and the controller.
not function.
controlled by the command
of Ethernet.
15R or BKM-16R.
MONITOR ID: Sets the ID
of the monitor.
GROUP ID: Sets the group
ID of the monitor.
IP ADDRESS: Sets the IP
address.
SUBNET MASK: Sets the
subnet mask.
(255.255.255.000)
DEFAULT GATEWAY:
Sets the default gateway on
or off.
ADDRESS: Sets the default
gateway.
CANCEL: Selects to cancel
the setting.
CONFIRM: Selects to save
the setting.
IP ADDRESS: Sets the IP
address.
SUBNET MASK: Sets the
subnet mask.
(255.255.255.000)
DEFAULT GATEWAY:
Sets the default gateway on
or off.
ADDRESS: Sets the default
gateway.
CANCEL: Selects to cancel
the setting.
CONFIRM: Selects to save
the setting.
PEER TO PEER: for one
to one connection
LAN: for connection via a
network
33
Adjustment Using the Menus

Advertisement

Table of Contents

   Also See for Sony Trimaster PVM-2541A

   Related Manuals for Sony Trimaster PVM-2541A

This manual is also suitable for:

Trimaster pvm-1741aPvm-2541Pvm-1741

Comments to this Manuals

Symbols: 0
Latest comments: