Sony Trimaster PVM-2541A Operating Instructions Manual page 11

When the menu is displayed, turn the control to select
a menu item or setting value, and then press the
control to confirm the setting.
If the menu is not displayed and the menu selection
control is pressed, the characters that represent the
names of the buttons light up. Also, the names of the
function selected in FUNCTION BUTTON
SETTING of the USER CONFIG menu appear on the
screen.
Alternatively, if the menu is not displayed and the
menu selection control is pressed for more than two
seconds, the signal format is displayed on the screen.
RETURN button
When the menu is displayed, press the button to reset
the value of an item to the previous value (except
some items).
When the menu is not displayed, press the button to
display the name of the function selected in
FUNCTION BUTTON SETTING of the USER
CONFIG menu.
MENU button
Press to display the on-screen menu.
Press again to clear the menu.
g 1 (standby) switch and indicator
Press to turn on the power when this unit is in standby
mode. The indicator lights in green. Press the switch
again to set the monitor in standby mode. The indicator
goes out. When fan error occurs, the indicator blinks in
green and amber alternately.
Location and Function of Parts and Controls
11