Sony Trimaster PVM-2541A Operating Instructions Manual page 27

Professional video monitor
Hide thumbs Also See for Trimaster PVM-2541A:
Table of Contents

Advertisement

MARKER SETTING
USER CONFIG – MARKER SETTING
M A R K E R E N A B L E :
M A R K E R S E L E C T :
C E N T E R M A R K E R :
S A F E T Y A R E A :
M A R K E R L E V E L :
M A R K E R M AT :
Submenu
Setting
MARKER ENABLE
Selects ON to display the marker
and OFF not to display.
Note
When NATIVE is selected in the
SCAN setting, the marker is not
displayed.
To display the marker, select a
setting other than NATIVE.
MARKER SELECT
Selects the aspect ratio according to
the film, when the frame of the film
is displayed on the screen.
When 16:9 aspect ratio is selected
with the button which the aspect
function is assigned
When 4:3 aspect ratio is selected
with the button which the aspect
function is assigned
CENTER MARKER
Selects ON to display the center
mark of the picture and OFF not to
display.
SAFETY AREA
Selects the safe area size for the
aspect ratio determined by the
button to which the aspect function
is assigned. You can select from
OFF, 80%, 85%, 88%, 90% and
93%.When the marker is displayed,
the safe area for the marker is
displayed.
MARKER LEVEL
Sets the luminance to display the
MARKER SELECT, CENTER
MARKER and SAFETY AREA.
You can select between 1 and 2.
When the setting is low, the marker
appears dark.
MARKER MAT
Selects whether you put mat on the
outside of the marker display.
• OFF: No mat is put.
• HALF: Gray mat is put.
xxx
xxx
xx
xxx
x
xxx
You can select from among
4:3, 15:9, 14:9, 13:9, 1.85:1,
2.35:1, 1.85:1 & 4:3 and
OFF.
You can select 16:9 or OFF.
T/C (time code) DISPLAY SETTING
USER CONFIG – T/C DISPLAY SETTING
T / C :
F O R M AT :
P O S I T I O N :
T R A N S PA R E N C Y:
Submenu
Setting
T/C
Selects ON to display the time code
display and OFF not to display.
FORMAT
Sets the time code format.
• VITC: To display the time code
• LTC: To display the time code in
POSITION
Sets the position of the time code
display. You can select between 1
and 2.
• 1: Top
• 2: Bottom
TRANSPARENCY
Selects BLACK or HALF
(transparent) for the background of
T/C display.
• BLACK: The background
• HALF: The background becomes
WFM/ALM/VECTOR (waveform monitor,
audio level meter, and vectorscope)
SETTING
USER CONFIG – WFM/ALM/VECTOR SETTING
D I S P L AY:
W F M / A L M / V E C T O R :
P O S I T I O N :
C O L O R :
I N T E N S I T Y:
Z O O M :
L I N E S E L E C T :
L I N E P O S I T I O N :
TA R G E T :
Submenu
Setting
DISPLAY
Select ON to display the WFM
(waveform monitor), ALM (audio level
meter), or VECTOR (Vectorscope); or
OFF not to display.
xxx
xxx
x
xxxx
in VITC format.
LTC format.
becomes black. Displayed
image is hidden behind the
background.
transparent. Displayed
image appears under the T/C
display.
xxx
xxxxxx
x
xx
x
xxx
xxx
xxx
xxx
Adjustment Using the Menus
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trimaster pvm-1741aPvm-2541Pvm-1741

Table of Contents