Assembly Instructions - BLADEZ QUANTUM Owner's Manual

Note: Assembly of this unit should take TWO persons about 45 minutes to properly assemble.
Main Frame Assembly
1. Slide the Upright Cap (M-7) into the
upper Upright assembly.
2. Attach the connector (L-4) to the main
connector (C-4) from the Upright
assembly
3. Insert the Upright assembly to the
base (be careful not to pinch wires)
4. Secure with bolts, washers and lock
washers (C-1, C-3, C-5) then slide the
cap down to cover the joint
Pedal & Accessory Assembly
1. Attach the Pedal tube to the Swing
Arm bracket
2. Secure the joint with bolts (H-6)
washers (H-5) and Nuts (H-4)
3. Slide the accessory tray (M-11) down
the Upright tube and secure with
screw (D-7) and screw (D-5)

ASSEMBLY INSTRUCTIONS

9
Quantum