Configuring Upnp - HIKVISION Network Video Recorder User Manual

User Manual of DS-7100NI Series NVR
Receiver's Address: The Email address of user to be notified.
Enable Attached Picture (optional): Check the checkbox of Enable Attached Picture if you want to send
email with attached alarm images. The interval is the time of two adjacent alarm images. You can also set
SMTP port and enable SSL here.
Interval: The interval refers to the time between two actions of sending attached pictures.
Test: Sends a test message to verify that the SMTP server can be reached.
6. Click Apply button to save the Email settings.
You can click Test button to test whether your Email settings work. The corresponding Attention message
7.
box will pop up. .

9.2.9 Configuring UPnP™

Purpose:
Universal Plug and Play (UPnP™) can permit the device seamlessly discover the presence of other network
devices on the network and establish functional network services for data sharing, communications, etc. You can
use the UPnP™ function to enable the fast connection of the device to the WAN via a router without port mapping.
Before you start:
If you want to enable the UPnP™ function of the device, you must enable the UPnP™ function of the router to
which your device is connected. When the network working mode of the device is set as multi-address, the Default
Route of the device should be in the same network segment as that of the LAN IP address of the router.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the UPnP tab to enter the UPnP™ interface.
3. Check checkbox to enable UPnP™.
4. Select the Mapping Type as Manual or Auto in the drop-down list.
Task1: Auto
If you select Auto, the Port Mapping items are read-only, and the external ports are set by the router
Figure 9. 19 Email Testing Attention
Figure 9. 20 UPnP™ Settings Interface
105