HIKVISION Network Video Recorder User Manual page 48

User Manual of DS-7100NI Series NVR
You can click the
II. To schedule an all-day recording, check the checkbox after the All Day item.
III. To arrange other schedule, leave the All Day checkbox blank and set the Start/End time.
Note: Up to 8 periods can be configured for each day. And the time periods can't be overlapped each other.
Repeat the above edit schedule steps to schedule recording for other days in the week. If the schedule can also be
applied to other days, click Copy.
IV. Click OK to save setting and back to upper level menu.
V. Click Apply in the Record Schedule interface to save the settings.
Draw the schedule:
Click on the color icons, you can choose the schedule type as continuous or event.
Descriptions of the color icons are shown in the figure below.
button to set the accurate time of the schedule.
Figure 5. 6 Edit Schedule
Figure 5. 7 Copy Schedule to Other Days
Figure 5. 8 Draw the Schedule
48