Setting Ptz Presets, Patrols & Patterns; Customizing Presets; Calling Presets - HIKVISION Network Video Recorder User Manual

User Manual of DS-7100NI Series NVR
4.1 Setting PTZ Presets, Patrols & Patterns
Before you start:
Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.

4.1.1 Customizing Presets

Purpose:
Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place.
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ
2. Use the directional button to wheel the camera to the location where you want to set preset.
3. Click the round icon before Save Preset.
4. Click the preset number to save the preset.
Repeat the steps2-4 to save more presets. If the number of the presets you want to save is more than 17, you can
click [...] and choose the available numbers.

4.1.2 Calling Presets

Purpose:
Figure 4. 1 PTZ- More Settings
Figure 4. 2 More Presets
37