User Manual of DS-7100NI Series NVR
3.
Click Apply to save the settings and click OK to exit the interface.
Configuring the customized protocols
Purpose:
To connect the network cameras which are not configured with the standard protocols, you can configure the
customized protocols for them.
Steps:
1.
Click the Protocol button in the custom adding IPC interface to enter the protocol management interface.
There are 16 customized protocols provided in the system, you can edit the protocol name; and choose whether to
enable the sub-stream.
2.
Choose the protocol type of transmission and choose the transfer protocols.
Note:
The protocol type and the transfer protocols must be supported by the connected network camera.
After adding the customized protocols, you can see the protocol name is listed in the dropdown list, please refer to
Figure 2. 21.
3.
Choose the protocols you just added to validate the connection of the network camera.
Figure 2. 20 Protocol Management Interface
Figure 2. 21 Protocol Setting
27