Configuring Upnp - HIKVISION DS-7104NI-SL User Manual

User Manual of Network Video Recorder
5. Configure the following Email settings:
6. Click Apply button to save the Email settings.
7.

9.2.10 Configuring UPnP™

Purpose:
Universal Plug and Play (UPnP™) can permit the device seamlessly discover the presence of other network
Downloaded from www.Manualslib.com
Figure 9. 20 Email Settings Interface
Enable Server Authentication (optional): Check the checkbox to enable the server authentication feature.
User Name: The user account of sender's Email for SMTP server authentication.
Password: The password of sender's Email for SMTP server authentication.
SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
SMTP Port No.: The SMTP port. The default TCP/IP port used for SMTP is 25.
Sender: The name of sender.
Sender's Address: The Email address of sender.
Select Receivers: Select the receiver. Up to 3 receivers can be configured.
Receiver: The name of user to be notified.
Receiver's Address: The Email address of user to be notified.
Enable Attached Picture (optional): Check the checkbox of Enable Attached Picture if you want to send
email with attached alarm images. The interval is the time of two adjacent alarm images. You can also set
SMTP port and enable SSL here.
Interval: The interval refers to the time between two actions of sending attached pictures.
Test: Sends a test message to verify that the SMTP server can be reached.
You can click Test button to test whether your Email settings work. The corresponding Attention message
box will pop up.
Figure 9. 21 Email Testing Attention
manuals search engine
128