Configuring More Settings For Device Parameters - HIKVISION Network Video Recorder User Manual

User Manual of DS-7100NI Series NVR
13.3 Configuring More Settings for Device
Parameters
Steps:
1. Enter the General Settings interface.
Menu >Configuration>General
2. Click the More Settings tab to enter the More Settings interface, as shown in Figure 13. 3
3. Configure the following settings:
•
Device Name: Edit the name of NVR.
•
Device No.: Edit the serial number of NVR. The Device No. can be set in the range of 1~255, and
the default No. is 255. The number is used for the remote and keyboard control.
•
Auto Logout: Set timeout time for menu inactivity. E.g.,when the timeout time is set to 5 Minutes,
then the system will exit from the current operation menu to live view screen after 5 minutes of
menu inactivity.
•
Menu Output Mode: You can choose the menu display on different video output.
4. Click the Apply button to save the settings.
Figure 13. 3 More Settings Interface
138
.