Starting Up And Shutting Down The Nvr - HIKVISION Network Video Recorder User Manual

User Manual of DS-7100NI Series NVR

2.1 Starting Up and Shutting Down the NVR

Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
Before you start:
Check that the voltage of the extra power supply is the same with the NVR's requirement, and the ground
connection is working properly.
Starting up the NVR:
Steps:
1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device.
2. After startup, the Power LED indicator blinks red. A splash screen with the status of the HDD appears on the
monitor.
Shutting down the NVR
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
2. Click the Shutdown button.
3. Click the Yes button.
4. Unplug the power supply on the rear panel when the shutdown attention pops up.
Rebooting the NVR
In the Shutdown menu, you can also reboot the NVR.
Figure 2. 1 Shutdown Menu
Figure 2. 2 Shutdown Attention
17