Configuring Hdd Error Alarms - HIKVISION Network Video Recorder User Manual
7100ni-sl series
Hide thumbs
Also See for Network Video Recorder:
- User manual (221 pages) ,
- Quick operation manual (27 pages) ,
- User manual (261 pages)
Table of Contents
Advertisement
User Manual of DS-7100NI Series NVR
10.4 Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal.
Steps:
1. Enter the Exception interface.
Menu > Configuration > Exceptions
2. Select the Exception Type to HDD Error from the dropdown list.
3. Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 10. 10.
Note:
The alarm type can be selected to: Audio Warning, Notify Surveillance Center, and Send Email. Please
refer to Chapter 8.5 Setting Alarm Response Actions.
4. Click the Apply button to save the settings
Figure 10. 10 Configure HDD Error Alarm
119
Advertisement
Table of Contents
