Uninstalling The Device - Silvercrest KH 2382 Operating Instructions Manual

GB

Uninstalling the device

18
If necessary secure your device against theft with additional measures.
Attach the securing screw with the anchoring plate
to the engine fi rewall of the vehicle.
Carefully push the device into the mounting duct until it locks into place.
After all connections have been made activate the RESET button with a ball
point pen or other pointed object.
Attach the face plate as described under "Installing the face plate".
IMPORTANT
Possible damage to the cable!
► Observe the position of the cable when sliding the device into the duct so
as to avoid damaging it.
Finally put on the bezel frame.
To remove the installed device proceed as follows:
Remove the bezel frame
Insert the right and left keys
device. (The tabs are now bent back.)
Pull the device out.
.
61
into their respective slots on the sides of the
63
MP3/CD Car Radio KH 2382
Installation
and the securing material
64